Cisco 642-832 : Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT)

Our company BraindumpStudy is powerful:

BraindumpStudy was built by several elite managers from different international IT companies since 2009. These people want to help more ambitious men achieve their elite dream. Our managers can get exam news always from their old friends who are working at kinds of internal company. So 642-832 is latest and valid. Our IT management will update every day.

Our service is the best:

1: As we mentioned we guarantee 642-832 100% pass. Once you fail the exam you send us the unqualified score scanned and we will full refund you. No help, No pay!
2: Our service time is 7*24 hours. If you have any problem about 642-832 please email to us we will reply you in two hours.
3: Some people are afraid that their privacy will be unsafe and buying 642-832 study guide is known by others. About security we are very careful and build an official process to handle your information. It is very safe.
4: For our regular 642-832 customer we will give discount if you want to buy other study guide. Also we will send you holidays coupon if you want. Other service details please ask us.

Don't hesitate again. We have good products and service. Passing 642-832 is a piece of cake with our study guide. Don't waste your time. Come on! Success is waiting for you!

Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

If you have problem on this exam 642-832 choosing us may be your best choice. Our pass rate is high to 98.9% and the similarity percentage between our 642-832 study guide and real exam is 90% based on our seven-year educating experience.

Our braindumps (642-832 - Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT)) are very good:

As for our braindumps we provide you three types to choose. The 642-832 PDF type is available for reading and printing. You can print more and practice many times. Also you can share with your friends and compete with them. The 642-832 Software type can be downloaded in all electronics and is more inactive and interesting when you are learning. Also the software has memory function that it can pick out mistakes you make and it will require you practice many times. The 642-832 On-Line type is the updated one based on soft type. Except of the advantages on soft type it has more functions and it makes you study while you are playing.

Cisco Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT) Sample Questions:

1. The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened DSW1 will not become the active router for HSRP group
10.
Use the supported commands to isolated the cause of this fault and answer the following questions.
On which device is the fault condition located?

A) ASW2
B) R3
C) DSW1
D) R2
E) ASW1
F) R1
G) R4
H) DSW2

2. Topic 4, Ticket 2 : ACCESS VLAN
Topology Overview (Actual Troubleshooting lab design is for below network design)
Client Should have IP 10.2.1.3
EIGRP 100 is running between switch DSW1 & DSW2
OSPF (Process ID 1) is running between R1, R2, R3, R4
Network of OSPF is redistributed in EIGRP
BGP 65001 is configured on R1 with Webserver cloud AS 65002
HSRP is running between DSW1 & DSW2 Switches
The company has created the test bed shown in the layer 2 and layer 3 topology exhibits.
This network consists of four routers, two layer 3 switches and two layer 2 switches.
In the IPv4 layer 3 topology, R1, R2, R3, and R4 are running OSPF with an OSPF process number 1.
DSW1, DSW2 and R4 are running EIGRP with an AS of 10. Redistribution is enabled where necessary.
R1 is running a BGP AS with a number of 65001. This AS has an eBGP connection to AS 65002 in the
ISP's network. Because the company's address space is in the private range.
R1 is also providing NAT translations between the inside (10.1.0.0/16 & 10.2.0.0/16) networks and outside
(209.65.0.0/24) network.
ASW1 and ASW2 are layer 2 switches.
NTP is enabled on all devices with 209.65.200.226 serving as the master clock source.
The client workstations receive their IP address and default gateway via R4's DHCP server.
The default gateway address of 10.2.1.254 is the IP address of HSRP group 10 which is running on DSW1
and DSW2.
In the IPv6 layer 3 topology R1, R2, and R3 are running OSPFv3 with an OSPF process number 6.
DSW1, DSW2 and R4 are running RIPng process name RIP_ZONE.
The two IPv6 routing domains, OSPF 6 and RIPng are connected via GRE tunnel running over the
underlying IPv4 OSPF domain. Redistrution is enabled where necessary.
Recently the implementation group has been using the test bed to do a `proof-of-concept' on several
implementations. This involved changing the configuration on one or more of the devices. You will be presented with a series of trouble tickets related to issues introduced during these configurations. Note: Although trouble tickets have many similar fault indications, each ticket has its own issue and
solution.
Each ticket has 3 sub questions that need to be answered & topology remains same.
Question-1 Fault is found on which device,
Question-2 Fault condition is related to,
Question-3 What exact problem is seen & what needs to be done for solution


Client is unable to ping IP 209.65.200.241

3. The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?


Client is unable to ping IP 209.65.200.241

A) In Configuration mode, using the interface range Fa 1/0/1 2, then no switchport port-security, followed by shutdown, no shutdown interface configuration commands.
B) In Configuration mode, using the interface range Fa 1/0/1 2, then no switchport port-security interface configuration commands.
C) In Configuration mode, using the interface range Fa 1/0/1 2, then no switchport port-security interface configuration commands. Then in exec mode clear errdisable interface fa 1/01 2 vlan 10 command
D) In Configuration mode, using the interface range Fa 1/0/1 2, then no switchport port-security interface configuration commands. Then in exec mode clear errdisable interface fa 1/0/1, then clear errdisable interface fa 1/0/2 commands.

4. DRAG DROP
FCAPS is a network maintenance model defined by ISO. FCAPS stands for:

5. Topic 6, Ticket 4 : BGP Neighbor
Topology Overview (Actual Troubleshooting lab design is for below network design)
Client Should have IP 10.2.1.3
EIGRP 100 is running between switch DSW1 & DSW2
OSPF (Process ID 1) is running between R1, R2, R3, R4
Network of OSPF is redistributed in EIGRP
BGP 65001 is configured on R1 with Webserver cloud AS 65002
HSRP is running between DSW1 & DSW2 Switches
The company has created the test bed shown in the layer 2 and layer 3 topology exhibits.
This network consists of four routers, two layer 3 switches and two layer 2 switches.
In the IPv4 layer 3 topology, R1, R2, R3, and R4 are running OSPF with an OSPF process number 1.
DSW1, DSW2 and R4 are running EIGRP with an AS of 10. Redistribution is enabled where necessary.
R1 is running a BGP AS with a number of 65001. This AS has an eBGP connection to AS 65002 in the
ISP's network. Because the company's address space is in the private range.
R1 is also providing NAT translations between the inside (10.1.0.0/16 & 10.2.0.0/16) networks and outside
(209.65.0.0/24) network.
ASW1 and ASW2 are layer 2 switches.
NTP is enabled on all devices with 209.65.200.226 serving as the master clock source.
The client workstations receive their IP address and default gateway via R4's DHCP server.
The default gateway address of 10.2.1.254 is the IP address of HSRP group 10 which is running on DSW1
and DSW2.
In the IPv6 layer 3 topology R1, R2, and R3 are running OSPFv3 with an OSPF process number 6.
DSW1, DSW2 and R4 are running RIPng process name RIP_ZONE.
The two IPv6 routing domains, OSPF 6 and RIPng are connected via GRE tunnel running over the
underlying IPv4 OSPF domain. Redistrution is enabled where necessary.
Recently the implementation group has been using the test bed to do a `proof-of-concept' on several
implementations. This involved changing the configuration on one or more of the devices. You will be
presented with a series of trouble tickets related to issues introduced during these configurations.
Note: Although trouble tickets have many similar fault indications, each ticket has its own issue and
solution.
Each ticket has 3 sub questions that need to be answered & topology remains same.
Question-1 Fault is found on which device,
Question-2 Fault condition is related to,
Question-3 What exact problem is seen & what needs to be done for solution


Client is unable to ping IP 209.65.200.241

Solutions: